Rapid Engineering Ovens, Pretreatment Washer & Conveyor Line

Rapid Engineering Powdercoating Dry-off and Curing Ovens

• Model: Combo Oven

• Serial: 082133

• 450 Degree maximum operating temperature

• 240v

• maximum part size: 4′6″ high × 2′6″ wide × 6′ long, per original manufacturer specifications.

• natural-gas fired

• maximum operating temperature as 450°F.

• Footprint Dimensions: Approximately 41' length x 27' width x 175" height

Rapid Engineering Powdercoating Pretreatment Washer

• Model: 5 Stage

• Serial: 082133

• 230 Volts, 3 Phase, 60hz

• maximum part size: 4′6″ high × 2′6″ wide × 6′ long.

• clear work opening: 60″ high × 36″ wide.

• two natural-gas-heated stages and tank capacities of approximately (2) 1,000-gallon and (3) 500-gallon tanks, per seller

• Footprint Dimensions: Approximately 63' x 8' x 10' (height does not include ductwork)

• The complete washer control cabinet, including the conveyor controls housed in it, is intended to stay with this lot.

Richards-Wilcox Powdercoating Conveyor Line

• Serial: U101

• Mighty Lube Systemic Lubrication

• Include (4) Drying Fans

• Use approximately 481 feet of track

• Zig-Zag enclosed-track overhead conveyor, variable speed of 3–9 FPM and original design speed of 6 FPM, per manufacturer specifications.

• Maximum part size for the existing line configuration: 4′6″ high × 2′6″ wide × 6′ long.

• pneumatic take-up and automatic Mighty Lube lubrication, subject to confirming the installed components.

IMPORTANT — SPECIAL RIGGING AND REMOVAL REQUIREMENTS

• Landlord approval is required for any rigger performing the removal of this item.

• The landlord has approved All Terrain Fabrication to perform the removal. For removal pricing and scheduling, please contact Jason at All Terrain Fabrication at [Phone Number].

• This lot consists of an interconnected industrial powder coating system. The conveyor is welded to supporting structures and integrated with the washer and oven assemblies. Removal will require substantial disassembly and specialized industrial rigging due to limited overhead clearance.

• Prospective bidders are strongly encouraged to inspect the equipment and obtain a professional removal estimate before bidding.

• The successful bidder will be responsible for the complete removal of all equipment included in this lot, subject to an approved removal plan, insurance requirements, applicable performance security, and the auction’s removal terms. Partial removal or abandonment of equipment will not be permitted.